QNAP [ Qmono ] [ 6.12.0.122 ] Mono Framework

[PekeQNP]

Is there any way to have mirror of

https://www.qnapclub.eu/en/qpkg/model/download/461860/Qmono_5.4.1.6.0_x86.qpkg

It is 173MB and fail to install on TS-459 Pro II v4.2.6?

That is the last version released for x86?

 

[QoolBox]

updated (x64 & arm-x41) , will check other version later

 

[slam666]

Bonjour,

J'ai Qmono 5.10 mais mon system ne veux pas updater a 5.14.

Severity Level Date Time Users Source IP Application Category Content
Error 2018/10/06 23:00:14 System 127.0.0.1 App Center App Installation [App Center] Failed to install Qmono. Model does not support Qmono.

TS-451+

Merci.

 

[PekeQNP]

updated (x64 & arm-x41) , will check other version later

Thank you in Advance for updating Qmono_5.4.1.6.0_x86

 

[QoolBox]

Bonjour,

J'ai Qmono 5.10 mais mon system ne veux pas updater a 5.14.

Severity Level Date Time Users Source IP Application Category Content
Error 2018/10/06 23:00:14 System 127.0.0.1 App Center App Installation [App Center] Failed to install Qmono. Model does not support Qmono.

TS-451+

Merci.

tu as bien pris x86_64

 

[QoolBox]

updated (x64 & arm-x41) , will check other version later

Thank you in Advance for updating Qmono_5.4.1.6.0_x86

it is more and more complicated to build x86 version (at least cross compiled)

mono source are making error while cross compiling for x86 (32bit), got some segmentation fault with no clue how to fix
wish i can find an old x86 (32bit) NAS to help me to debug the problems

 

[PekeQNP]

Hi,
I was more hoping to re upload Qmono_5.4.1.6.0_x86 full version for start. My main problem is that I have 5GB of RAM (Cruical 4GB CT51264AC800 or Samsung 4GB M470T5267AZ3-CF7 that can be found as low as 20USD on eBay), but it is hard to find module that is recognized (I was lucky) and you can go with 1 Kingston 2GB SODIMand be safe.

System is reported as x86_x64 (TS-459 Pro II) But idiotically left on 4.2.6

What device would satisfy you ? I see TS 259+ can be found around 120-170€

 

[Thornin]

Salut !

Déjà chapeau pour le boulot accompli jusque la je me suis lancé dans la mise en place de Sonarr il y a peu et ça tourne au petit oigons je suis ravi

Petit kouack j'ai voulu intégrer Jackett pour aller un peu plus loin et je me retrouve bloqué par la version de Mono, je suis sur un TS-639 en version 4.2.6 qui est en x86 et la dernière version de Jackett demande la version 5.10 mini pour fonctionner je suis donc coincé

J'ai bien compris que tu ne disposais plus du matos pour de permettre de compiler et que cela devenait difficile, je n'y connais pas grand chose mais si je peux faire quelque chose de mon coté je serais ravi d'aider, ou si tu connais un site un tuto ou quoique ce soit qui pourrai me guider pour compiler moi même en package x86 je suis preneur

Ça me déchire de voir que mon NAS, qui est certes vieillot, mais qui tourne toujours comme un coucou suisse est déjà en fin de vie... haaa obsolescence programmer...

Merci !

 

[PekeQNP]

Hi,
I absolutely agree, for things I use my NAS I'm only missing few things, working Sonarr and Node.js v8 (another story, but I bought pi 3+ for using it).

Also RAM Upgrade made wonders and I have USB Sound Card that works with Music Station and connected to house sound system.

I still think that they cut the x59 series wrongly, but can explain the reason from commercial side.

 

[groumf]

Bonjour,

C'est un sacré travail tout ça.

J'ai une question, est il prévu d'avoir Qmono 5.12 ou plus pour les x31 ?

C'est juste histoire d'installer un petit Emby, vu que Plex ne fonctionne plus, et qu'Emby est 100% open, et facilement interfaçable avec libreElec et autres kodi.

Belle journée

 

[QoolBox]

x31 c'est une bonne galère ... pour cross compiler..

le système de firmware est basé sur un toolchain DD-WRT ... donc pas un standard Ubuntu standard comme le serait la gamme arm-x41 (x31+, x28, x31P ...)
il manque des librairies et surtout de liens symbolique (j'ai déjà remonté le soucis dans un ticket, mais a mon avis cela ne sera pas corrigé)

 

[ant191]

Hi all,
I'm having some issues getting a version of mono > 3.10 to run on my nas, it is a bit older TS-559 Pro+. I keep getting an error pointing issues with the libm.so.6 architecture.

When Qmono "Qmono_5.14.0.177_x86_64.qpkg" is installed, it will not run.
[~] # /opt/Qmono/bin/mono --version
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32
[~] # /share/MD0_DATA/.qpkg/Qmono/Qmono.sh start
/share/MD0_DATA/.qpkg/Qmono/Qmono.sh: line 24: /usr/share/.mono: is a directory
/opt/Qmono/bin/mono: error while loading shared libraries: libm.so.6: wrong ELF class: ELFCLASS32

When "Qmono_3.10.0.0_x86.qpkg" is installed it runs fine.
[~] # /opt/Qmono/bin/mono --version
Mono JIT compiler version 3.10.0 (tarball Fri Apr 24 14:18:37 EDT 2015)
Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com
TLS: __thread
SIGSEGV: altstack
Notifications: epoll
Architecture: x86
Disabled: none
Misc: softdebug
LLVM: supported, not enabled.
GC: sgen

[~] # uname -a
Linux NAS 3.4.6 #1 SMP Fri Oct 26 12:47:07 CST 2018 x86_64 unknown

I can see a few people have run into this, I've done a ton of googling but am stumped on this one.
Any ideas? :-D

 

[QoolBox]

dont use command line on latest x86 Qmono... just like ARMV5 version this one is experimental

it runs under another ELF, wont cross compile due to old glibc embedded on those NAS version

I am actuallt trying to get an old device for test and validation

 

[ant191]

Thanks for the info QoolBox. Seems to be any version > 3.10 won't execute.
If you need me to run any commands / debugs I'm happy to assist.

 

[QoolBox]

updated to 5.18.0.240

with fix Roslyn compilation for arm_64

"still searching for a solution for old armv5 and old x86 - 32bits NAS"

 

[Tosh]

Salut Stéphane,

L'App Center me propose la mise à jour de Qmono.
La version actuelle installée est la 5.14.0.177, il me propose donc de passer sur la version 5.18.0.240.
Le problème c'est que lorsque j'essaie de faire cette mise à jour, le message d'erreur suivant apparaît :

App Installation [App Center] Failed to install Qmono. Model does not support Qmono.

Je dois m'inquiéter ou pas ?

Merci

 

[QoolBox]

tu as bien accepté la possibilité d'installer des applications tierces dans l'Appcenter ?

 

[Tosh]

Oui, je n'ai jamais rencontré le moindre soucis avant...

 

[QoolBox]

bizarre

il y a rien de bloquant dans le script

tu as essayé de télécharger le paquet et de l'installer manuellement

 

[PekeQNP]

"still searching for a solution for old armv5 and old x86 - 32bits NAS"

Contact me in PM to arrange skype connection And I can try to help you with that. I Already have Node.js 8.13.1 installed manually.

EDIT: I am half way thru compiling Mono from github, it fails in "autogen.sh" when tries to cross-compile and I really want to compile only x86. Can you help?