[Firmware Release] QTS 4.3.5.0756 build 20181110

QTS 4.2, QTS 4.3, QTS 4.4, QTS 4.5, QTS 5.0...
Avatar du membre
QoolBox
Représentant de QNAP
Messages : 6492
Enregistré le : 02 janvier 2014
Professionnel : Oui
Localisation : France
Contact :

[Firmware Release] QTS 4.3.5.0756 build 20181110

Message par QoolBox » 10 nov. 2018 16:09

QTS 4.3.5.0756 build 20181110.

Code : Tout sélectionner

[Important Notes]
- To ensure system functionality, after updating QTS to 4.3.5, please also update Container Station to 1.9 in App Center before enabling QVR Pro.
- The RADVD service previously did not have an outgoing interface. Please reconfigure the RADVD service after upgrading.
- Due to security concerns, support for "Wi-Fi ad-hoc mode" has been removed.
- This QTS update changes the file system of the system partition to ext4 for ARM-based models with Annapurna Labs processors. For data security reasons, you are not able to downgrade QTS to a previous version after this update.
Affected models: TS-131P, TS-231P, TS-431P, TS-531P, TS-231+, TS-431+, TS-231P2, TS-431P2, TS-431X, TS-431X2, TS-531X, TS-831X, TS-1231XU-RP, TS-1231XU, TS-831XU-RP, TS-831XU, TS-431XU-RP, TS-431XU, TS-431XeU, and TS-1635.
- For the status of QTS updates and maintenance for your NAS model, visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- Below are the kernel versions for NAS models that are supported by QTS 4.3.5:
Kernel 3.10.20: TS-128, TS-228
Kernel 3.2.26: TS-x31, TS-x31U
Kernel 3.4.6: TS-x69, TS-x69U, TS-x69L
Kernel 4.2.8: all other models supported by QTS 4.3.5
- Due to the limitations of future kernel updates, QTS 4.3.5 is the final available QTS update for the following NAS models: TS-EC1679U-SAS-RP, TS-EC1679U-RP, TS-1679U-RP, TS-EC1279U-SAS-RP, TS-EC1279U-RP, TS-1279U-RP, TS-1079 Pro, TS-EC879U-RP, TS-879U-RP, TS-1270U-RP, TS-870U-RP, TS-470U-RP, TS-470U-SP, TS-879 Pro, TVS-870, TS-870 Pro, TS-870, TVS-670, TS-670 Pro, TS-670, TVS-470, TS-470 Pro, and TS-470.
- Due to the limitations of non-expandable memory capacity and 32-bit processor architecture, starting from QTS 4.3.5, the TS-128 and TS-228 no longer support Container Station and all the dependent applications, including Notes Station 3, Qcontactz, QcalAgent, AWS Greengrass, and QIoT Suite Lite.
 
[Fixed Issues]
- Fixed a command injection vulnerability in Media Library (CVE-2018-14746).
- Fixed a null pointer dereference vulnerability in Media Library (CVE-2018-14747).
- Fixed an improper authorization vulnerability (CVE-2018-14748).
- Fixed a stack-based buffer overflow vulnerability (CVE-2018-14749).
- QTS would sometimes still display error messages about unclean file systems even after users performed file system checks.
- Storage & Snapshots did not provide enough options or clear instructions for creating iSCSI LUNs.
- Network & Virtual Switch could not correctly display virtual adapters that had been created after users updated QTS to 4.3.5.0684.
- Users could not directly mount a remote NAS via FTP in File Station.
- QTS could not enter disk standby mode after users installed CloudLink.
- Checking file system for a volume during a folder migration would cause migration errors.
- QTS would display unexpected installation messages for SSD Profiling Tool when users restarted the NAS.
- When users searched for TV series in TheTVDB, Video Station could not display posters if the cast information was not available.
- Users could not expand the capacity of a volume to more than 16 TB even if the value of bytes per inode was set to 32 K.
- Users could not download data or search for torrents in Download Station after selecting a VPN connection as the gateway for Download Station in App Center.
- In Firefox, Music Station would still play the current track when users tried to skip to the next track.
- Users could not modify or delete the specified username when configuring the SMTP service account settings in Notification Center.
- In File Station, users could not mount a remote NAS that was joined to an Active Directory domain.
- Expanding thick volumes would cause longer NAS startup times.
- It would take longer than expected to open folders that contained .mp4 files in File Station.
- Users could not configure Service Binding settings after enabling VLAN for a port trunking group.
- Certain adapters would disappear from port trunking groups after users woke up the NAS from sleep mode.
- Using the Asmedia ASM1061 controller (firmware version 4.20) would cause disk errors.
- Users could only set the jumbo frame to 1500 for the QXG-10G1T network card.
- Users could not search for files in a shared folder mounted on macOS if the folder path contained spaces.
- Virtual switches would remove virtual adapters used by virtual machines after users woke up the NAS from sleep mode.
- Photo Station could not display photo tags that users added via SMB.
- myQNAPcloud would keep checking network connectivity after users disabled UPnP port forwarding.
- Resource Monitor could not display network usage for adapters where VLAN was enabled.
- Network & Virtual Switch could not detect the QM2-2P10G1T expansion card after users updated QTS to 4.3.5.0728.
- Users could not set the subnet mask of an adapter to 255.255.248.0 (/21).
- Inserting a USB external device to the NAS would change the SMB shared folder access permissions to the default settings.
- Network & Virtual Switch would stop responding after users set 255.255.255.255 as the netmask of a static route. 
- Users could only set the jumbo frame to 1500 after installing a second network card.
- QTS could not detect the QM2-2S-220A expansion card and the M.2 SSDs installed on the card.
- Users could not open .eml files when using File Station in a new tab even if QmailAgent was installed.
- Users could not check the file system for a snapshot shared folder volume.
- Notification Center would send error messages when users downloaded files via a share link created by a non-administrator user.
- Users could not access the SQL server database after enabling Service Binding and creating a large number of virtual interfaces.
- Fan rotation speeds would increase unexpectedly after users woke up the NAS from sleep mode.
- The exFAT license could not function normally after users inserted an exFAT external drive and then restarted the NAS.
- Users could not play videos with VLC media player when using File Station in a new tab.
- Users could not play .m4a audio files in Music Station after pausing the files for a while.
- Static routes would sometimes disappear after users restarted the NAS.
- Users could not enable Domain Controller on the TS-x31 series even after configuring the default gateway.
- Users could not preview the files in Qsync folders when viewing a volume snapshot in Snapshot Manager.
- Network & Virtual Switch would display unrecognizable virtual adapters after users enabled OpenVPN and installed Container Station.
- After creating a virtual switch with a port trunking group using a static IP address, users could not access QTS when waking up the NAS from sleep mode. 
- Unexpected error messages about DNS registration failure would appear when users joined the NAS to a domain and enabled WINS server.

Avatar du membre
QoolBox
Représentant de QNAP
Messages : 6492
Enregistré le : 02 janvier 2014
Professionnel : Oui
Localisation : France
Contact :

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par QoolBox » 10 nov. 2018 16:10

Code : Tout sélectionner

https://download.qnap.com/Storage/HS-251/HS-251_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/IS-400/IS-400_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/Mustang-200/Mustang-200_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/QB-103/QB-103_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/SS-1279U/SS-1279U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/SS-1879U/SS-1879U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/SS-2479U/SS-2479U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-1079/TS-1079_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-1270U/TS-1270U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-1279U/TS-1279U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X41/TS-131P_231P_431P_X31+_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-1679U/TS-1679U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-470/TS-470_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-470U/TS-470U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-531P/TS-531P_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-670/TS-670_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-870/TS-870_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-870U/TS-870U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-879/TS-879_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-879U/TS-879U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-KVM/TS-KVM_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X28/TS-X28_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X28A/TS-X28A_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X31/TS-X31_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X31P2/TS-X31P2_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X31U/TS-X31U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X31X/TS-X31X_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X31XU/TS-X31XU_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X32/TS-X32_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X32U/TS-X32U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X35/TS-X35_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X35A/TS-X35A_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X51/TS-X51_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X51A/TS-X51A_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X51B/TS-X51B_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X51U/TS-X51U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X53/TS-X53_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X53II/TS-X53A_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X53B/TS-X53B_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X53BU/TS-X53BU_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/SS-X53/TS-X53S_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X53U/TS-X53U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X63U/TS-X63U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X73U/TS-X73U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X77/TS-X77_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X77U/TS-X77U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X80/TS-X80_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X80U/TS-X80U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X82/TS-X82_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X82S/TS-X82S_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X82U/TS-X82U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X85/TS-X85_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X85U/TS-X85U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X89U/TS-X89U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-XA28A/TS-XA28A_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-XA51/TS-XA51_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-XA73/TS-XA73_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-XA82/TS-XA82_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X63/TVS-X63_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X71/TVS-X71_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X71U/TVS-X71U_20181110-4.3.5.0756.zip
https://download.qnap.com/Storage/TS-X73/TVS-X73_20181110-4.3.5.0756.zip

coeur51
Padawan
Messages : 148
Enregistré le : 19 décembre 2015

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par coeur51 » 13 nov. 2018 18:18

Hello,

Comme je le disais récemment, les updates deviennent une vrai galère (tout du moins sur mon NAS) et ce dernier ne fait pas exception à la règle...

- Redémarrage du NAS avant update
- Attente que tous les services soient up
- Mise à jour du firmware via l'admi QNAP
- 6 longs bip
- Le NAS ne répond plus
- Redémarrage forcé du NAS
- The first boot area on the flash is corrupted
- The first boot area on the flash has been recovered
- Attente que tous les services soient up
- Mise à jour du firmware via Qfinder Pro
- Redémarrage auto du NAS
- The end, la NAS est reparti comme en 40

Bonne soirée
QNAP TS-253 Pro (8Go de RAM DDR3L) : WD Red 2x4To

Avatar du membre
QoolBox
Représentant de QNAP
Messages : 6492
Enregistré le : 02 janvier 2014
Professionnel : Oui
Localisation : France
Contact :

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par QoolBox » 13 nov. 2018 18:39

- The first boot area on the flash is corrupted
- The first boot area on the flash has been recovered
ton DOM sur la carte mère commence à fatiguer.. surtout si c'est répétitif à chaques mise à jours

coeur51
Padawan
Messages : 148
Enregistré le : 19 décembre 2015

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par coeur51 » 13 nov. 2018 20:36

Merci pour ton retour QoolBox.

Mais bon, je n'ai plus de DOM, je l'ai viré et remplacé par autre chose quant il a rendu l'âme au firmware précédent :mrgreen:
QNAP TS-253 Pro (8Go de RAM DDR3L) : WD Red 2x4To

Ishido
Chevalier Jedi
Messages : 430
Enregistré le : 07 janvier 2017

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par Ishido » 14 nov. 2018 14:40

hello :-)

Dis papa c'est quoi un DOM ?

Merci :-)
NAS QNAP TS 451A 8 Go [ RAM HyperX Impact HX316LS9IBK2/8 RAM 8GB 1600MHz DDR3L CL9 SODIMM (Kit de 2) 1.35V] - 1 X HDD WD Red 3 To - QTS 4.3.5.0756 - Build 20181110
Onduleur APC BX 950VA

coeur51
Padawan
Messages : 148
Enregistré le : 19 décembre 2015

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par coeur51 » 15 nov. 2018 09:05

Hello,

Le DOM (Disk On Module) est une mémoire Flash qui contient l'image du firmware du NAS. A chaque démarrage, ton NAS boot sur cette image. QoolBox pourra certainement en dire plus que moi...

Le DOM de mon NAS :
Image

Bonne journée
QNAP TS-253 Pro (8Go de RAM DDR3L) : WD Red 2x4To

Ishido
Chevalier Jedi
Messages : 430
Enregistré le : 07 janvier 2017

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par Ishido » 15 nov. 2018 09:11

salut

ok je comprend, donc au final tu as soudé autre chose à la place ?
NAS QNAP TS 451A 8 Go [ RAM HyperX Impact HX316LS9IBK2/8 RAM 8GB 1600MHz DDR3L CL9 SODIMM (Kit de 2) 1.35V] - 1 X HDD WD Red 3 To - QTS 4.3.5.0756 - Build 20181110
Onduleur APC BX 950VA

coeur51
Padawan
Messages : 148
Enregistré le : 19 décembre 2015

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par coeur51 » 15 nov. 2018 09:46

Je n'ai pas eu besoin de recourir à la soudure. Un bon vieux connecteur USB standard avec connecteur (4 broches ou 8 + 1 broches) et prise (s) standard USB-A et une clé USB et le tour est joué :mrgreen:

A noter que mon NAS est hors garanti. Donc, je déconseille de le faire sauf si le DOM est irrécupérable et le NAS hors garanti :!:
QNAP TS-253 Pro (8Go de RAM DDR3L) : WD Red 2x4To

Avatar du membre
Gravitys
Chevalier Jedi
Messages : 320
Enregistré le : 27 août 2015

Re: [Firmware Release] QTS 4.3.5.0756 build 20181110

Message par Gravitys » 15 nov. 2018 23:41

Pour info, le firmware 760 vient de sortir...
TVS-671 I5/16Go - 4x4To Seagate NAS / 512Gb SSD
QTS 4.3.5.0722 build 20181007
HDD Backup : USB 8To WD - Back UPS Pro 900Va

Répondre

Retourner vers « Firmwares QTS »

Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 2 invités