Forum des NAS

Tous les fabricants de NAS réunis sur un forum unique : Asustor, Qnap, Synology...

BitTorrent Sync, KODI, IPKG, NZBGet, pyLoad...

Modérateur : QoolBox

#87225
Bonjour / Bonsoir,

Ayant un TS-431P2 tout neuf, j'ai essayé d'installer QTransmission via le qpkg depuis le Qnap Club, (Version 2.94.0 et j'ai pris en TS-X31) mais dès qu'il lance l'installation il retourne une erreur : [App Center] Failed to install QTransmission 2.94.0. Installation package is incompatible. Use the correct package.

Ma version de QTS est 4.4.1.1216

Y'a-t-il quelque chose à faire avant de pouvoir l'installer ?

Merci d'avance :)
#87237
Sur le site de QNAP : Processeur quad-core AnnapurnaLabs Alpine AL-314 32 bits ARM® Cortex-A15 1,7 GHz

Je suis tombé sur ce post : https://forum.qnap.com/viewtopic.php?t=131352
"All Annapurna Labs ARMv7 (32-bit) models like the TS-x31P, TS-x31+, TS-x31U, TS-x31X, TSx35) require using the "TS-x41" packages - the "TS-x31" packages are exclusively for the TS-x31 only."

J'ai essayé avec des packages en TS-X41 et là c'est passé sans soucis.
Avatar de l’utilisateur
par Gaudi
#91599
QoolBox a écrit : 25 mai 2020 16:36 package fin de vie , merci de voir

viewtopic.php?f=21&t=13936

End of life package thanks to see

viewtopic.php?f=21&t=13936

Thanks QoolBox for the new release!!

It would be great to add to the release the improved Web Interface found here: https://github.com/ronggang/transmission-web-control

Steps I have followed to install.

  • Stop Transmission, this is important as changes are reverted if Transmission is running.
  • Clone web server tree is found here: https://github.com/ronggang/transmissio ... master/src
  • Copy the files from the download src folder to /share/CACHEDEV1_DATA/.qpkg/QTransmission3/share/transmission (in my NAS)
    I have created a folder called remote-control.
  • Edit QTransmission3.sh (/share/CACHEDEV1_DATA/.qpkg/QTransmission3) and add the line
    Code : Tout sélectionner
    export TRANSMISSION_WEB_HOME=$QPKG_ROOT/share/transmission/remote-control
    after
    Code : Tout sélectionner
    export HOME=$QPKG_ROOT
  • Restart Transmission and the new interface should be online.

I guess that an upgrade will overwrite the QTransmission3.sh file, which will need to be edited again while maintaining the settings.


Thanks again and regards.

Avatar de l’utilisateur
par Gaudi
#91603
QoolBox a écrit : 26 mai 2020 17:32
Gaudi a écrit : 26 mai 2020 17:27
Thanks QoolBox for the new release!!

It would be great to add to the release the improved Web Interface found here: https://github.com/ronggang/transmission-web-control
any english version ?

Thanks for your quick reply.

Although the readme is in chinese, the web interface is actually in English, and it has some other languages as well (as shown here: https://github.com/ronggang/transmissio ... ntrol/i18n)
For the English read me: https://github.com/ronggang/transmissio ... ntrol/wiki

I have not used the install script, rather than that I performed the steps listed in my previous post.
The install script stored here (https://github.com/ronggang/transmissio ... control.sh) may perform other activities. You could take a look to understand its inner working. I lack some knowledge to fully understand it.


Thank you!

  • 1
  • 30
  • 31
  • 32
  • 33
  • 34

sans doute car le repo n'est pas signé, alo[…]

OK, parfait, ma curiosité est satisfaite. […]

[Surveillance] Choix de caméra

Ah super, merci pour ces liens ! J'ai fait mon ch[…]

En local, c'est pourtant simple de prendre la main[…]

Site hébergé sur un serveur IKOULA

Ikoula