Qnap [ iPerf3 Server ] [ 3.12.0 ] Network Benchmarking Tool

QoolBox

Représentant QNAP
2 Janvier 2014
10 559
163
153
49
France
www.qnap.com
logo_iperf.png

Source : https://iperf.fr

Download :

https://www.myqnap.org/product/iperf3/


Note :

launch 10 server instance on port 5200 -> 5209

example of bench over LAN with a windows client :

TS-453PRO

Code:
iperf3.exe -c 192.168.1.36
Connecting to host 192.168.1.36, port 5201
[  4] local 192.168.1.178 port 61295 connected to 192.168.1.36 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   110 MBytes   918 Mbits/sec
[  4]   1.00-2.00   sec   101 MBytes   850 Mbits/sec
[  4]   2.00-3.00   sec   100 MBytes   843 Mbits/sec
[  4]   3.00-4.00   sec   108 MBytes   907 Mbits/sec
[  4]   4.00-5.00   sec   106 MBytes   889 Mbits/sec
[  4]   5.00-6.00   sec   103 MBytes   861 Mbits/sec
[  4]   6.00-7.00   sec   105 MBytes   884 Mbits/sec
[  4]   7.00-8.00   sec   112 MBytes   938 Mbits/sec
[  4]   8.00-9.00   sec   109 MBytes   913 Mbits/sec
[  4]   9.00-10.00  sec   109 MBytes   912 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  1.04 GBytes   891 Mbits/sec                  sender
[  4]   0.00-10.00  sec  1.04 GBytes   891 Mbits/sec                  receiver

iperf Done.

TS-231

Code:
iperf3.exe -c 192.168.1.58
Connecting to host 192.168.1.58, port 5201
[  4] local 192.168.1.178 port 61560 connected to 192.168.1.58 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  86.4 MBytes   724 Mbits/sec
[  4]   1.00-2.00   sec  83.9 MBytes   703 Mbits/sec
[  4]   2.00-3.00   sec  82.4 MBytes   691 Mbits/sec
[  4]   3.00-4.00   sec  82.1 MBytes   689 Mbits/sec
[  4]   4.00-5.00   sec  82.0 MBytes   688 Mbits/sec
[  4]   5.00-6.00   sec  81.8 MBytes   686 Mbits/sec
[  4]   6.00-7.00   sec  84.2 MBytes   706 Mbits/sec
[  4]   7.00-8.00   sec  84.5 MBytes   709 Mbits/sec
[  4]   8.00-9.00   sec  85.0 MBytes   713 Mbits/sec
[  4]   9.00-10.00  sec  60.2 MBytes   505 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   812 MBytes   682 Mbits/sec                  sender
[  4]   0.00-10.00  sec   812 MBytes   681 Mbits/sec                  receiver

iperf Done.

about :

What is iPerf / iPerf3 ?

iPerf3 is a tool for active measurements of the maximum achievable bandwidth on IP networks.
It supports tuning of various parameters related to timing, buffers and protocols (TCP, UDP, SCTP with IPv4 and IPv6).
For each test it reports the bandwidth, loss, and other parameters.
This is a new implementation that shares no code with the original iPerf and also is not backwards compatible.
iPerf was orginally developed by NLANR/DAST. iPerf3 is principally developed by ESnet / Lawrence Berkeley National Laboratory.
It is released under a three-clause BSD license.
 
Dernière édition par un modérateur: