redfirebrooks a dit:
modifie cette ligne qui parle d'elle même
$PYTHON SABnzbd.py --config-file $CONFIG/config.ini --server 0.0.0.0:8282 --https 8243 --daemon
dans /opt/QSabNZBdPlus/QSabNZBdPlus.sh
Qnap [ QSABnzbdPlus ] [ 3.5.3 ] Usenet Downloader
- Auteur du sujet QoolBox
- Date de début
modifie cette ligne qui parle d'elle même
$PYTHON SABnzbd.py --config-file $CONFIG/config.ini --server 0.0.0.0:8282 --https 8243 --daemon
dans /opt/QSabNZBdPlus/QSabNZBdPlus.sh
QoolBox a dit:
Merci beaucoup et bravo pour la rapidité !!!
Pourquoi ce n'est pas modifiable à partir de l'interface ?
Petit problème, j'obtiens l'erreur suivante depui 2.1.1: SABYenc disabled: no correct version found! (Found v3.3.1, expecting v3.0.2)
J'ai la même erreur
https://github.com/sabnzbd/sabnzbd/issues/1033
Il faudra attendre la prochaine version
https://github.com/sabnzbd/sabnzbd/issues/1033
Il faudra attendre la prochaine version
Bonjour à tous,
Je sollicite votre aide pour installer QSABnzbdPlus sur mon TS-228.
Si j'ai bien compris, pas d'appli officielle ni via le Qnapclub Store pour mon matos.
Il faut donc une installation manuelle mais la première page de ce topic me laisse pantois
.
D'une manière générale, dois-je installer les versions X31 ou X41? (Une réponse pour la X41 m'arrangerait vu que la X31 n'apparait pas pour QSABnzbdPlus :lol: )
Ensuite, je présume qu'il faut installer celle qui correspond au FW 43, compte-tenu de ma version 4.3.3. Mais ne s'agit-il pas d'une version antérieure de SABnzbd? Et pourquoi?
Merci d'avance
Edit: Pourquoi seulement QTS 4.2.1 sur le Store?
Je sollicite votre aide pour installer QSABnzbdPlus sur mon TS-228.
Si j'ai bien compris, pas d'appli officielle ni via le Qnapclub Store pour mon matos.
Il faut donc une installation manuelle mais la première page de ce topic me laisse pantois
.D'une manière générale, dois-je installer les versions X31 ou X41? (Une réponse pour la X41 m'arrangerait vu que la X31 n'apparait pas pour QSABnzbdPlus :lol: )
Ensuite, je présume qu'il faut installer celle qui correspond au FW 43, compte-tenu de ma version 4.3.3. Mais ne s'agit-il pas d'une version antérieure de SABnzbd? Et pourquoi?
Merci d'avance
Edit: Pourquoi seulement QTS 4.2.1 sur le Store?
normalement l'ARM-x41 doit s'installer, j'ai corrigé sur le repo.. comme le qpkg à migré au fur et a mesure du temps... le 4.3.3 n'a pas suivi
Merci beaucoup pour ta réactivité. Hâte de tester ça le WE prochain.
Je ne suis pas du métier donc toujours la crainte de faire une connerie...
Je ne suis pas du métier donc toujours la crainte de faire une connerie...
qnaplet a dit:
essaye de le retélécharger, tu dois avoir une corruption du qpkg.. le repo une fois uplaoder analyse le fichier avant de le mettre dispo.. je ne pense pas que cela vienne de là.. mais peut être du CDN en amont sinon.. qui délivre les fichiers via un cache
I updated the package today and didn't receive the "Data error". Everything is fine now. Thanks for your work with all your compiled QNAP packages
Gravitys a dit:
Same here. Currently SABYenc is disabled and fixing this on QNAP appears to be somewhat difficult for newbie at least. Any help is appreciated!
PS. https://sabnzbd.org/wiki/installation/sabyenc.html
Found one working solution and by simply replacing the file "sabyenc.so" from version 3.3.1 which i installed using Entware-ng (which didn't work obviously). No errors so far.
I used WinSCP to connect into the NAS, logged in as admin. I had to enabled the "show hidden files" from view->preferences->panels. The "sabyenc.so" file was located for me was in path below.
I've provided the sabyenc.so file as attachment (unzip it of course). Only notable thing is that the file size is a lot smaller compared to the original one but again it seems to work just fine.
Code:
[SABnzbd:404] SABYenc module (v3.3.1)... found!I used WinSCP to connect into the NAS, logged in as admin. I had to enabled the "show hidden files" from view->preferences->panels. The "sabyenc.so" file was located for me was in path below.
Code:
/share/5000C5001EEA36C8_DATA/.qpkg/QSabNZBdPlus/lib/python2.7/site-packagesI've provided the sabyenc.so file as attachment (unzip it of course). Only notable thing is that the file size is a lot smaller compared to the original one but again it seems to work just fine.
dont understand why you need that
it is already updating it on SABnzbd start with a
/opt/QSabNZBdPlus/bin/pip install sabyenc --upgrade
it is already updating it on SABnzbd start with a
/opt/QSabNZBdPlus/bin/pip install sabyenc --upgrade
QoolBox a dit:
If i'd known that was possible, anyways thanks for the help! :-D
You probably want to run to get the correct version?
Code:
pip install sabyenc==3.3.1After updating to 2.3.1, I'm getting this error:
I looked into my log on restart, and it seems that the program cannot find par2.
Where is par2 supposed to be stored? I cannot find it within /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/bin
EDIT: I fixed this problem by installing Par2cmdline-MT
I guess I should have read back more, as this was already discussed. But if you also have this problem, search for par2 on QNAP Club repository and install Par2cmdline-MT. This will install par2 after which it will be available at /usr/bin/par2.
Code:
par2 binary... NOT found! Verification and repair will not be possible.I looked into my log on restart, and it seems that the program cannot find par2.
Code:
2017-12-06 21:50:11,401::INFO::[SABnzbd:1148] --------------------------------
2017-12-06 21:50:11,401::INFO::[SABnzbd:1149] SABnzbd.py-2.3.1 (rev=<HASH>25eeb3ebe70b972)
2017-12-06 21:50:11,401::INFO::[SABnzbd:1150] Full executable path = /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SABnzbd/SABnzbd.py
2017-12-06 21:50:11,402::INFO::[SABnzbd:1160] Platform = posix
2017-12-06 21:50:11,402::INFO::[SABnzbd:1161] Python-version = 2.7.13 (default, Jan 7 2017, 02:11:25)
[GCC 4.8.4]
2017-12-06 21:50:11,402::INFO::[SABnzbd:1162] Arguments = SABnzbd.py --config-file /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SAB_CONFIG/config.ini --server 0.0.0.0:8282 --https 8243 --daemon
2017-12-06 21:50:11,403::INFO::[SABnzbd:1167] Preferred encoding = UTF-8
2017-12-06 21:50:11,403::INFO::[SABnzbd:1177] SSL version = OpenSSL 1.0.2j 26 Sep 2016
2017-12-06 21:50:11,403::INFO::[SABnzbd:1225] Read INI file /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SAB_CONFIG/config.ini
2017-12-06 21:50:11,407::INFO::[postproc:87] Loading postproc queue
2017-12-06 21:50:11,409::INFO::[__init__:974] [N/A] /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SAB_CONFIG/<USERNAME>/Rating.sab missing
2017-12-06 21:50:11,410::INFO::[scheduler:207] Setting schedule for midnight BPS reset
2017-12-06 21:50:11,468::INFO::[config:853] Writing settings to INI file /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SAB_CONFIG/config.ini
2017-12-06 21:50:11,496::INFO::[__init__:345] All processes started
2017-12-06 21:50:11,497::INFO::[SABnzbd:280] Web dir is /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SABnzbd/interfaces/Plush
2017-12-06 21:50:11,497::INFO::[SABnzbd:280] Web dir is /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SABnzbd/interfaces/Config
2017-12-06 21:50:11,519::INFO::[config:853] Writing settings to INI file /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/SAB_CONFIG/config.ini
2017-12-06 21:50:11,577::WARNING::[SABnzbd:409] SABYenc disabled: no correct version found! (Found v3.3.2, expecting v3.3.1)
2017-12-06 21:50:11,578::INFO::[SABnzbd:416] _yenc module... found!
2017-12-06 21:50:11,578::INFO::[SABnzbd:421] Cryptography module (v1.7.1)... found!
2017-12-06 21:50:11,579::ERROR::[SABnzbd:428] par2 binary... NOT found! Verification and repair will not be possible.
2017-12-06 21:50:11,579::INFO::[SABnzbd:436] UNRAR binary... found (/usr/local/sbin/unrar)
2017-12-06 21:50:11,579::INFO::[SABnzbd:444] UNRAR binary version 5.30
2017-12-06 21:50:11,580::INFO::[SABnzbd:449] unzip binary... found (/usr/bin/unzip)
2017-12-06 21:50:11,580::INFO::[SABnzbd:454] 7za binary... found (/usr/local/sbin/7z)
2017-12-06 21:50:11,581::INFO::[SABnzbd:460] nice binary... found (/share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/bin/nice)
2017-12-06 21:50:11,581::INFO::[SABnzbd:464] ionice binary... found (/share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/bin/ionice)Where is par2 supposed to be stored? I cannot find it within /share/CACHEDEV1_DATA/.qpkg/QSabNZBdPlus/bin
EDIT: I fixed this problem by installing Par2cmdline-MT
I guess I should have read back more, as this was already discussed. But if you also have this problem, search for par2 on QNAP Club repository and install Par2cmdline-MT. This will install par2 after which it will be available at /usr/bin/par2.